Makita 6805BV Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 6805BV. Makita 6805BV 8 pagina's. Variable speed/reversing
Ook voor Makita 6805BV: Gebruiksaanwijzing (12 pagina's)
Pagina afdrukken
FUNCTIONAL
DESCRIPTION
3
1
2
4
1. Locator
2. Front cap
3. Pointer
4. Adjusting ring
1 mm
1 mm
4
1
2
3
1. Speed control screw
2. Switch trigger
3. Lock button
4. Low
5. High
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Depth adjustment
004147
When you wish to drive self drilling screws, etc., adjust the depth as follows.
Turn the locator to adjust the depth.
Initially, adjust the locator to create a distance of approximately 1 mm from the
004152
tip of the front cap (which works in conjunction with the locator) to the base of
the screw head. One full turn of the locator equals 1 mm change in depth.
After adjusting the locator, turn the adjusting ring so that the 6" mark is aligned
with the pointer on the gear housing. Drive a trial screw into your material or a
piece of duplicate material. If the depth is not suitable for the screw, continue
adjusting until the proper depth setting is obtained.
004156
Switch action
004157
5
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by
increasing pressure on the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
A speed control screw is provided so that maximum tool speed can be limited
(variable). Turn the speed control screw clockwise for higher speed, and coun-
terclockwise for lower speed.
5