Makita 6805BV Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 6805BV. Makita 6805BV 8 stron. Variable speed/reversing
Również dla Makita 6805BV: Instrukcja obsługi (12 strony)

Drukuj stronę

1. Functional Description

FUNCTIONAL

DESCRIPTION

1. Locator

2. Front cap

3. Pointer

4. Adjusting ring

1 mm

1. Speed control screw

2. Switch trigger

3. Lock button

4. Low

5. High

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Depth adjustment

004147

When you wish to drive self drilling screws, etc., adjust the depth as follows.

Turn the locator to adjust the depth.

Initially, adjust the locator to create a distance of approximately 1 mm from the

004152

tip of the front cap (which works in conjunction with the locator) to the base of

the screw head. One full turn of the locator equals 1 mm change in depth.

After adjusting the locator, turn the adjusting ring so that the 6" mark is aligned

with the pointer on the gear housing. Drive a trial screw into your material or a

piece of duplicate material. If the depth is not suitable for the screw, continue

adjusting until the proper depth setting is obtained.

004156

Switch action

004157

CAUTION:

•

Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Tool speed is increased by

increasing pressure on the switch trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

A speed control screw is provided so that maximum tool speed can be limited

(variable). Turn the speed control screw clockwise for higher speed, and coun-

terclockwise for lower speed.