Jameco Electronics 8x8x8 LED Cube Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} Jameco Electronics 8x8x8 LED Cube. Jameco Electronics 8x8x8 LED Cube 13 pagina's.

Pagina afdrukken
8x8x8 LED Cube
PART NO. 2168940
This LED Cube will light up any party. Your friends will be mesmerized by its hypnotic effect as lights dazzle and dance in brilliant
patterns. It utilizes code based off of Instructables designer, CHR, and uses an Arduino UNO to power the cube and act as a
programmer. This cube gives of a warm glow that is pleasant to the eye to entertain any person of any age. Though it might quite a
commitment to build, the effort will be worth the wait. Surprise your friends and family with this incredible art piece, as it will be sure to
turn heads. Don't skip this wonderful project because it offers invaluable opportunities for electronic construction and Arduino coding.
I'll just leave it up to this video to convince you that this will be the next project you will be building.
http://www.youtube.com/watch?feature=player_embedded&v=6mXM-oGggrM
Time Required: Several Days depending on experience
Experience Level: Advanced
Required tools and parts:
Soldering Iron
Solder
Helping Hands
Wire Cutters/Strippers
Needle Nose Pliers
Vice
Aluminum Foil
Peg Board or piece of wood
Drill
Bill of Materials:
Qty
Jameco SKU
100
690620
1
206587
3
333973
8
38608
1
37373
8
46084
1
45330
9
153702
3
70755
16
178511
1
330722
1
93761
1
29891
1
690718
1
643831
9
525325
1
2151486
2
139231
4
139222
Component Name
100 ohm Resistors
Prototyping Board
Status Red LEDs
20 Pin Chip Sockets
16 Pin Chip Socket
SN74HC574N Chip
74HC138N Chip
8 Pin Male Header
8 Pin Female Header
2222A Transistor
1000uF Capacitor
100uF Capacitor
10uF Capacitor
240 ohm Resistor
16 Strand Ribbon Cable
Ribbon Cable Header
Arduino UNO
1" Standoffs
3/4" Standoffs