Jameco Electronics 8x8x8 LED Cube Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Jameco Electronics 8x8x8 LED Cube. Jameco Electronics 8x8x8 LED Cube 13 pagina's.

Step 6 - 8 Identical Layers

Repeat the last three steps another seven times to complete your layers. This will take patience and time.

Step 7 - Let's Get Vertical

Now with eight different layers, we will build up!

I used triangular folds of paper to hold each layer above the other when I soldered. Make sure to place the first layer in the rig and

start from there. I would recommend to bend the leads slightly so you can have each layer directly above the other, otherwise it can

come out slightly crooked. Apply minimal heat and solder, and be careful when going into the cube with the iron. Read Step 10 before

you begin to solder.