Makita BHR241 Technische informatie - Pagina 8

Blader online of download pdf Technische informatie voor {categorie_naam} Makita BHR241. Makita BHR241 14 pagina's. Cordless combination hammer
Ook voor Makita BHR241: Technische informatie (14 pagina's)

Pagina afdrukken

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -7. Impact Bolt Section (cont.)

ASSEMBLING

2) Push Ring spring 28 with Piston cylinder until it fits to the inner groove of Tool holder complete. (Fig. 29)

Fig. 29

Note: Use an extra Piston cylinder as a jig. Never use Piston cylinder that is to be

assembled to the machine.

Piston cylinder

as a repairing jig

Ring spring 28

Tool holder

complete

[3] -8. Swash Bearing Section

DISASSEMBLING

1) Disassemble Tool holder section as illustrated in Fig. 3.

2) Disassemble Change lever as illustrated in Figs. 4 and 5.

3) Separate Gear housing complete from Motor housing complete. And then, remove Armature from Gear housing complete.

(Refer to Figs. 8 to 10.)

4) Remove Stop ring E-4, Flat washer 5 and Compression spring 6 from pin of Inner housing complete. (Fig. 30)

5) Remove two M4x12 Hex socket bolts that fasten Bearing retainer to Inner housing complete. (Fig. 31)

Fig. 30

Pin of Inner housing complete

Stop ring E-4

Flat washer 5

Compression spring 6

Change plate

Piston cylinder

as a repairing jig

Inner groove of

Tool holder complete

Ring spring 28

O ring case

Fig. 31

M4x12 Hex socket

head bolt (2 pcs.)

See more at http://safe-manuals.com

P 8/ 14