ALIBI ALI-IPV5060RP Snelle installatiehandleiding - Pagina 5

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} ALIBI ALI-IPV5060RP. ALIBI ALI-IPV5060RP 7 pagina's. 6mp 360 fisheye ip camera

Pagina afdrukken

Log into the camera again. A Live View display will appear.

PTZ Preset - Path select tabs

Step 7.

Setup Fisheye Parameters

Alibi Fisheye cameras include a special setup menu called Fisheye Parameters. This menu is used to

configure the camera for the mounting orientation (type - Wall, Table, or Ceiling), and Real Time Mode

(Enable or Disable). These parameters affect the Live View mode options, image effect, PTZ control, Preset

scene, etc. PTZ View and panoramic view cannot be performed at the same time in Live View mod. Also,

when a PTZ view is displayed, no local recording is performed.

When configuring an Alibi Fisheye camera, use this menu to select the applicable Mounting Type

parameter. To configure this menu:

Open the Fisheye Parameter menu. Go to Setup tab | System | Fisheye Parameter

Open the Mount Type drop-down list and select the applicable mounting orientation of the

camera: Wall, Table or Ceiling.

In the Real-time Mode field, select either Enable or Disable.

Click Save to retain your settings.

www.observint.com

PTZ button

PTZ control panel

Step 8.

Setup Storage Management

In the Storage Management menu, you can prepare a storage device, such as an internal micro SD card or

a NAS (See the ALIBI™ IP Camera Software User Manual) for use. These devices usually must be formatted

before they can store data from the camera. You can also set the percentages of Pictures (Captures) and

Video recordings across the storage device.

To open the Storage Management menu, go to Setup tab | Storage | Storage Management

In the example above, a 16 GB MicroSD card was installed in the camera.

Check the box for the HDD you want to configure.

If the Status of the HDD is Offline, the HDD is not recognized. Check the settings on the NAS menu. See

NOTE

the document ALIBI™ IP Camera Software User Manual

documentation CD with your camera.

In the HDD Device List, if the Status external storage device (HDD) you added shows an

Uninitialized status:

Click the Format button to format the HDD. Format performs a full format of the HDD (erases

all data from the disk).

In the Message from webpage pop-up window, click OK to continue.

Wait until the format process completes before continuing. When formatting completes

successfully, the HDD status will change to Normal.

Edit the percentages of the HDD allocated for Picture and Record data as needed.

Click Save.

Step 9.

Setup PTZ video streams

In the Live View window shown above, click on the fisheye image. Notice that each video stream is

identified as 1, 2, or 3 in each video stream and on the fisheye image.

provided on the software and