Makita BJV180 Technische informatie - Pagina 8

Blader online of download pdf Technische informatie voor {categorie_naam} Makita BJV180. Makita BJV180 13 pagina's. Cordless jig saw
Ook voor Makita BJV180: Opsplitsing onderdelen (3 pagina's), Specificatieblad (2 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (18 pagina's)

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -4. Balance Plate, Crank Complete

DISASSEMBLING

1) Separate Gear housing cover section from Gear housing complete. (Figs. 6, 7 in page 4)

2) Lock Crank complete using 1R235 or the like, and remove two M4x12 Hex socket head bolts. (Fig. 25)

Note: It is recommended to use impact driver to remove the bolts because threadlocker is applied to them.

3) By removing Retaining ring S-8 using 1R291, Balance plate and Crank complete can be disassembled from

Gear housing as illustrated in Fig. 26.

Fig. 25

1R235

Balance plate

or the like

Retaining ring S-8

Crank complete

ASSEMBLING

1) Assemble Flat washer 8 to the shaft portion of Gear housing complete. (Fig. 27)

2) Assemble Seal plate on Push plate. Mount Push plate on Gear complete, then assemble Gear complete to the shaft

portion of Gear housing complete. (Fig. 28)

3) Lubricate the parts with reference to "Lubrication" in page 2.

4) Assemble Balance plate to Gear complete while inserting the three pins of Gear housing complete through the

corresponding small elliptic holes of Balance plate. (Fig. 29)

Fig. 27

Flat washer 8

shaft portion

Gear housing complete

Hex socket head bolt

M4x12 (2 pcs)

Gear housing complete

Fig. 28

Gear complete

Push plate

Seal plate

Fig. 26

Retaining ring S-8

Needle bearing 407

Crank complete

Balance plate

Gear complete

Push plate

Seal plate

Gear housing complete

Fig. 29

P 8/13

Flat washer 8

Balance plate