Alibi Security Vigilant ALI-SB50-UZ Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Alibi Security Vigilant ALI-SB50-UZ. Alibi Security Vigilant ALI-SB50-UZ 2 pagina's. Specialty ip camera
Introduction
Alibi Vigilant
This is a megapixel network camera which uses a
Scan Exmor CMOS Sensor.
Built-in triple codec(H.264, MPEG4 and MJPEG) and streaming server,
Specialty IP Camera
IP Camera Quick Guide
the advantage of this camera allow you to monitor real time image from
a remote location via internet.
This camera supports both static IP and Dynamic IP and it also supports
latestes Onvif.
Quickstart Guide
This is a network camera which uses a Sony STARVIS CMOS Sensor from Exmor
Built-in triple codec(H.264, H.265, and MJPEG) and streaming server,
the advantage of this camera allow you to monitor real time image from
a remote location via internet.
This camera supports both static IP and Dynamic IP and it also supports
latest Onvif.
Caution
Software, server and service may be changer accordin gto policy or may be stopper without prior notification.
Appearance, function, and specification may be changes without prior notification. Ou rcompany assumes no
responsibility for visible or invisible loss resulted from changes in policy or products.
Safety Cautions
1.) This camera may be damaged by electrical and physical shock.
2.) Use regulated 12V DC power supply.
3.) In case of unit failure DO NOT try to disassemble the product. Contact Alibi Tech support at 888-858-1442
for troubleshooting.
4.) All resposibility by using this unit is on the owner.
5.) In case of installation in high location, be sure to mount securely to prevent the unit from falling below.
If the product is to be put out of operation indefinitely, take it to a local recycling plant for proper disposal.
Please read the instructions carefully for correct use of the camera and preserve it for future reference. This
specification is subject to change without prior notice to improve the quality.
Read the safety notice and important tips in the
included manuals before using your camera
Accesing the IPC & Log in
Live Video
1
Default IP address is 192.168.1.30
Screen Capture
Stream
disconnection
1
Progressive
2
Default ID : admin
Password : admin
Full Screen
MIC. On / Off
(Option)
Speaker On / Off
3
(Option)
File path
Record
Stream Connection
Stream selection(Main / Sub)
Zoom Control
Focus Control
One time Auto Focus
Introduction
Accesing the IPC & Log in
1
This is a megapixel network camera which uses a
Scan Exmor CMOS Sensor.
Built-in triple codec(H.264, MPEG4 and MJPEG) and streaming server,
the advantage of this camera allow you to monitor real time image from
a remote location via internet.
This camera supports both static IP and Dynamic IP and it also supports
latestes Onvif.
2
Live Video
Setup - Network setting
3
Use DHCP(Dynamic Host Configuration Protocol)
Live
Setup
Event
1
Default IP address is 192.168.1.30
Screen Capture
Stream
Full Screen
disconnection
1
Port Change
Speaker On / Off
File path
IP address Change
Record
(Default IP Address is 192.168.1.30)
Stream Connection
Stream selection(Main / Sub)
Zoom Control
2
1
Progressive
2
Default ID : admin
Password : admin
3
Live
Setup
Event
3
4
MIC. On / Off
(Option)
(Option)
Focus Control
One time Auto Focus
Live
Setup
Insta