Lexmark 25A0452 - C 736dtn Color Laser Printer Media Handleiding - Pagina 3

Blader online of download pdf Media Handleiding voor {categorie_naam} Lexmark 25A0452 - C 736dtn Color Laser Printer. Lexmark 25A0452 - C 736dtn Color Laser Printer 3 pagina's. Color laser printers
Ook voor Lexmark 25A0452 - C 736dtn Color Laser Printer: Installatiehandleiding voor traymodule (1 pagina's), Installatiehandleiding voor traymodule (2 pagina's), Snelle referentie (2 pagina's), Aansluithandleiding (5 pagina's), Handleiding voor afdrukken (3 pagina's), Brochure & specificaties (6 pagina's), Handleiding afdrukken (9 pagina's), Menu Kaart (3 pagina's), Gebruiksaanwijzing (2 pagina's), Installatie (2 pagina's), Informatie handleiding (1 pagina's), Beknopte handleiding (4 pagina's)

Pagina afdrukken
Lexmark 25A0452 - C 736dtn Color Laser Printer Media Handleiding
•
Store individual packages on a flat surface.
•
Do not store anything on top of individual paper packages.

Avoiding jams

The following hints can help you avoid jams:
•
Use only recommended paper or specialty media.
For more information, see the Card Stock & Label Guide available on the Lexmark Web site at
www.lexmark.com/publications.
•
Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
•
Do not load wrinkled, creased, damp, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same stack.
•
Store the paper in an appropriate environment.
•
Do not remove trays while the printer is printing. Wait for Load tray <x> or Ready to appear before removing a tray.
•
Do not load the multipurpose tray while the printer is printing. Load the tray prior to printing, or wait for Load
Multipurpose tray with <x> to appear.
•
Push all trays in firmly after loading paper.
•
Make sure the guides in the trays are properly positioned.
•
Make sure all paper sizes and paper types are set correctly in the printer control panel menu.
•
Make sure all printer cables are attached correctly. For more information, see the setup documentation.
Media guide
Page 3 of 3