Gardena 8000/4 4T Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena 8000/4 4T. Gardena 8000/4 4T 8 pagina's. Petrol-driven motor pump

Pagina afdrukken
Gardena 8000/4 4T Gebruiksaanwijzing
5. Hold the pump firmly by the handle
handle
B
handle
The motor starts.
6. Slowly release the starter handle
to prevent damaging the starter (do not let the starter handle
spring back).
7. When the motor is warm, gradually push the choke lever down
to position
8. Set the throttle lever
C
1. Push the throttle lever
Turning off the motor :
2. Turn the ignition switch
V In case of an emergency shut off the motor by turning
the ignition switch to „0".

5. Maintenance

V Turn off the motor and unplug the spark plug connector
before carrying out all maintenance work.
Maintenance plan :
Regular maintenance and adjustments are important in order to
keep the motor in perfect working order.
v Maintain the pump and motor according to the following main-
tenance plan.
After
each use
X
Motor oil –- check oil level
– change oil
X
Air filter
– check
– clean
Clean / adjust spark plug
Clean combustion chamber,
valves, fuel tank and fuel filter
Check valve play, fuel hose,
turbine, housing cover
and backflow preventer
(replace if necessary)
1) Carry out maintenance more frequently if using the pump in a dusty
environment.
2) This maintenance work must only be carried out at a GARDENA
Service Centre.
18
B
and pull the starter
C
until you feel a slight resistance. Then pull the starter
C
forcefully.
C
and guide it back by hand
(open).
8
to the desired delivery capacity.
8
all the way down to the
A
to „0" (OFF).
After the
Every
Every
first month or
3 months
6 months
first 10 hours
or 25 hours
or 50 hours
of operation
of operation
of operation
X
X
X
1)
X
Check oil level / pour in oil :
D
position.
Changing the oil :
Each year
or every
100 hours
of operation
Checking the petrol level /
pouring in petrol :
X
2)
F
X
2)
G
Only use oils labelled SE or SF.
15 W-40
10 W-40
10 W-30
E
– 30 – 20 – 10
0
10
20
30
40 °C
– 20
0
20
40
60
80
100 °F
D
1. Unscrew the oil dipstick
from the oil filler neck
and wipe clean.
D
2. Insert the oil dipstick
into the oil filler neck
in and remove again.
3. If there is no oil on the oil dipstick
4. Select the appropriate oil from the table according to the aver-
age ambient temperature.
5. Pour in oil up to the upper edge of the oil filler neck
D
screw the oil dipstick
back into the oil filler neck
Tip : Drain the oil when the motor is still warm to ensure that the
oil is drained quickly and completely. The oil tank holds 0.1 litres.
D
1. Unscrew the oil dipstick
from the oil filler neck
2. Tilt the pump towards the oil filler neck
into a suitable container.
3. Pour in the new oil up to the upper edge of the oil filler neck
D
and screw the oil dipstick
back into the oil filler neck
4. Dispose of the old oil according to the appropriate environmen-
tal regulations.
E
The motor is designed for the combustion of normal petrol
(octane number 86 or higher). The petrol tank holds 0.65 litres.
1. Check the level of the petrol in the transparent petrol tank.
2. If the tank is empty or if there is only a small amount of petrol
in the tank, pour in petrol.
3. Carefully tilt the pump to the side so that the petrol cap
faces upwards.
F
4. Unscrew the petrol cap
and pour in petrol up to the lower
G
edge of the petrol filler neck
F
5. Screw the petrol cap
back on and tighten by hand.
Carefully tilt the pump back to the horizontal position.
E
, pull out
E
, do not screw
D
, pour in oil.
E
and
E
.
E
.
E
and drain the oil
E
.
F
.
19