Gardena 4068 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena 4068. Gardena 4068 14 pagina's. Electric aerator
Ook voor Gardena 4068: Gebruikershandleiding (9 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruikershandleiding (9 pagina's), Gebruiksaanwijzing (14 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruikershandleiding (10 pagina's)

Pagina afdrukken

Problem

Whistling sound

Motor will not start

Motor cuts out because

blocking protection has

been activated

Aerating results are not

satisfactory

Aerator cylinder no longer

turns

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

8. Storing Your Electric Aerator

Storage :

Transport :

Possible Cause

Cogged belt slipping.

Faulty cable.

The conductor cross-section of

the extension cable is possibly

too low.

Blocked by foreign bodies.

Aerating depth too large (aerator

cylinder has been adjusted for

wear without wear to the knives).

The grass is too tall.

Aerator cylinder is worn.

Cog-belt faulty.

Lawn has grown too tall.

Overload protection (torsion

spring too short) is overturned.

To save space the aerator can be folded up by releasing

the wing nuts.

Take care during this process that the cable does not

become trapped.

v Store the Aerator in a dry, closed room to which children

cannot gain access.

1. Switch off motor, unplug from the mains and wait until the

aerator cylinder stops.

2. Move the wear compensation to the transport position and

raise the aerator when transporting it over sensitive surfaces,

e.g. tiles.

Remedy

v Have the machine repaired

by GARDENA Service.

v Check cable.

v Contact your electrician.

1. Switch off the motor, re-

move the mains plug from

the socket and wait until

the Aerator has stopped

rotating.

2. Remove foreign bodies.

3. After approx. 1 minute

switch on the Aerator.

1. Leave motor to cool down.

2. Set adjustment for wear

correctly.

v Mow the lawn before

aerating (see 3. Function

"Correct Aerating" ).

v Adjust aerator cylinder

(see Maintenance).

v Have the machine repaired

by GARDENA Service.

v Mow the lawn before using

the Aerator.

v Replace torsion bar.