Gardena 4068 Manual de Instruções - Página 9

Procurar online ou descarregar pdf Manual de Instruções para Equipamento para relva e jardim Gardena 4068. Gardena 4068 14 páginas. Electric aerator
Também para Gardena 4068: Manual do operador (9 páginas), Manual de Instruções (15 páginas), Manual do operador (9 páginas), Manual de Instruções (14 páginas), Manual de Instruções (13 páginas), Manual de Instruções (13 páginas), Manual de Instruções (15 páginas), Manual do operador (10 páginas)

Imprimir página
Gardena 4068 Manual de Instruções
Problem
Whistling sound
Motor will not start
Motor cuts out because
blocking protection has
been activated
Aerating results are not
satisfactory
Aerator cylinder no longer
turns
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.

8. Storing Your Electric Aerator

Storage :
Transport :
Possible Cause
Cogged belt slipping.
Faulty cable.
The conductor cross-section of
the extension cable is possibly
too low.
Blocked by foreign bodies.
Aerating depth too large (aerator
cylinder has been adjusted for
wear without wear to the knives).
The grass is too tall.
Aerator cylinder is worn.
Cog-belt faulty.
Lawn has grown too tall.
Overload protection (torsion
spring too short) is overturned.
To save space the aerator can be folded up by releasing
the wing nuts.
Take care during this process that the cable does not
become trapped.
v Store the Aerator in a dry, closed room to which children
cannot gain access.
1. Switch off motor, unplug from the mains and wait until the
aerator cylinder stops.
2. Move the wear compensation to the transport position and
raise the aerator when transporting it over sensitive surfaces,
e.g. tiles.
Remedy
v Have the machine repaired
by GARDENA Service.
v Check cable.
v Contact your electrician.
1. Switch off the motor, re-
move the mains plug from
the socket and wait until
the Aerator has stopped
rotating.
2. Remove foreign bodies.
3. After approx. 1 minute
switch on the Aerator.
1. Leave motor to cool down.
2. Set adjustment for wear
correctly.
v Mow the lawn before
aerating (see 3. Function
"Correct Aerating" ).
v Adjust aerator cylinder
(see Maintenance).
v Have the machine repaired
by GARDENA Service.
v Mow the lawn before using
the Aerator.
v Replace torsion bar.
19