Makita 6073D Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 6073D. Makita 6073D 16 pagina's. Equipped with electric brake 10 mm (3/8”) with fast charger

Pagina afdrukken

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to

see that keys and adjusting wrenches are removed from tool before turning

it on.

15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger

on switch. Be sure switch

OFF when plugging in.

16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, u s e only

extension cords intended for u s e outdoors and

marked.

17. STAY ALERT. Watch what you

are

doing, u s e common sense. Don't operate

tool when you are tired.

18. CHECK DAMAGED PARTS. Before further u s e of the tool, a guard

other

part that is damaged should be carefully checked t o determine that it will

operate properly and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts, mounting, and any

other conditions that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced by an authorized serv-

ice center unless otherwise indicated elsewhere in this instruction manual.

Have defective switches replaced by authorized service center. Don't use

tool if switch d o e s not turn it on and off.

19.

GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded

surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

20. REPLACEMENT PARTS. When servicing, u s e only identical replacement parts.

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,

outlet,

etc.J

be sure the voltage supplied is the same a s that specified on the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY t o the user - as well a s damage t o

the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with

voltage

less

than the nameplate rating is harmful t o the motor.