Fronius TPS 5000 Handleiding voor installatie-instructies - Pagina 12
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Fronius TPS 5000. Fronius TPS 5000 20 pagina's. Second earthing socket at rear
Ook voor Fronius TPS 5000: Handleiding voor installatie-instructies (20 pagina's)
Pagina afdrukken
Mounting the sec-
ond earthing
socket at the rear
Mounting the second earthing socket
Threading in the cable
Connecting the cable to the front current socket
12
(3)
(1+9)
(g)
(8)
(k)
(j)
(i)
(h)
(8)
(3)
1
IMPORTANT! The recess in the current so-
cket must point downwards.
2
(f)
3
(2)
Housing
(1)
Mount the rear (-) current-socket (1),
complete with its blanking cap (9):
-
Insert the rear (-) current-socket
(1), working from the outside to-
wards the inside
-
Insert insulating washer
-
Screw on the hexagonal nut
-
Tighten the hexagonal nut with the
torque wrench, width 32
-
Thightening torque 35 Nm
Thread the cable (8) through the rub-
ber lead-throughs (f) and (g)
Connect the cable to the front current
socket (1):
-
Put the belleville spring washer (i)
over the hexagon head screw (h)
-
Put the star (j) over the hexagon
head screw (h)
-
Put the cable lug of the cable (8)
over the hexagon head screw (h)
-
Put the cable lug of the existing
current cable (k) over the hexagon
head screw (h)
-
Screw the hexagon head screw
(h) into the current socket
-
Tighten the hexagon head screw
(h) with the torque wrench, width
19
-
Thighting torque 15 - 35 Nm