AlienBees ABR800 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AlienBees ABR800. AlienBees ABR800 16 pagina's. Ringflash

What Arrives With Your Ringflash?

The Ring Reflector

The ABR800 arrives with our standard wide-angle reflector. This flat field reflector measures

10 inches in diameter, having an 80º beam spread. The reflector is made of high-temperature,

high-strength polycarbonate with a chrome-filmed interior. The supplied reflector provides

even coverage with the widest of lens angles - a must for interior and architectural shots.

Additionally, the reflector is designed to hold our accessory 20º honeycomb grids (sold

separately) for "Hollywood Style" lighting and for other low key effects. Use of the included

diffuser with the grid spot prevents stray light from falling on the lens. The internal cooling fan

along with intelligent thermal management prevents heat build up, allowing the reflector with

accessories to be used with full modeling lamp brightness.

A Set of Eight Modeling Lamps

Eight 10-Watt, 24-Volt Modeling Lamps are used in each unit, mounted coaxially on-axis

with the flashtube to provide true "What-You-See-Is-What-You-Get" previews. Proprietary

voltage regulation circuitry provides effective modeling output comparable to a 150-Watt

lamp. With matched light patterns and diffusion, the output of the lamps will match the

pattern of light that you will see on film or digital image. The long-life, high-efficiency bulbs

have a 500 to 3000 hour lifespan and may be replaced by the user.

For replacement lamps, please see item 10W, a set of 8 lamps, available on our website.

A Pair of Half-Circle Flashtubes

The ABR800 uses two 10mm, 6-inch diameter flashtubes that work as a pair, with both tubes

required to create a complete circular flash. The tubes have an expected lifespan of 250,000

to 1,000,000 flashes and upon exhaustion or breakage, the user may easily replace them.

For replacements, please see item ABRFT10MM, available on our website. As the unit requires two

half-circle flashtubes, you may purchase a single ABRFT10MM flashtube, or purchase the pair. For

best results, we recommend replacing both at the same time.

Our 15-foot Power Cord

As the ABR800 requires AC power, each unit comes with our heavy-duty 15-foot power cord,

with a three-wire grounded plug to connect to a standard 120 VAC, 50-60 Hz power outlet.

The cord connects on the back panel of the unit with a standard IEC connector and has a

low-profile, down-angle connector that fits inside the recessed power cord socket to prevent

any interference with the camera body.

If a longer cord is desired, we also offer an optional 25-foot cord, though this cord does not have

the down-angle connector. For the longer, optional cord, please see item UPC25, available on our

website.

Our 12-inch Sync Cord

Our 12-inch sync cord arrives with each unit, so that you may connect the ringflash to your

camera. This sync cord has a 1/8-inch miniplug on one end to connect on the back panel of

your ringflash, with a PC-connection on the other end to connect to your camera. With the

sync cord, your ringflash will only take its cue to fire from you when your shutter is pressed.

If your camera does not have a PC outlet, the sync cord can be connected through your hot shoe

with an adapter or our CyberSync™ 2.4GHz Radio Remote Control system may be used. For more

information please contact us. You can call us or visit us online at www.paulcbuff.com

Toll Free 1-800-443-5542 Please call us if you need any assistance!