AlienBees ABR800 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AlienBees ABR800. AlienBees ABR800 16 pagina's. Ringflash

The ABR800 Ringflash Back Control Panel

Power Cord Socket

The provided UPC15 power

cord plugs into this female

power cord socket then into

a suitable AC power source.

Flashpower / Modeling Output Control

The flashpower and modeling lamp output are continuously adjustable over a 6 f-stop variability, with

typical accuracy and repeatability of plus or minus 1/10 f-stop. The output is adjusted steplessly from Full

down to 1/32nd of the total power, in whole f-stop increments and everywhere in between, adjusted

with this slide fader showing marked fractions and f-stop increments. This convenient slide fader allows

you to adjust the output of your unit simply and quickly, changing the quantity and intensity of the light

produced without having to physically move the light source back and for th.

Sync Jack

The supplied 12-inch sync cord has a 1/8-inch miniplug on one end and a PC-connection on the other.

The miniplug plugs into this sync jack while the other end of the cord connects to your camera's PC

connection outlet or hot shoe adapter.

Slave Cell

The slave cell will detect any flash of light and reliably fire the unit whenever it "sees" any flash of light

from your camera's built-in flash or from another flash unit that is synced to your camera. The slave cell is

disengaged whenever a sync cord or blank "dummy" plug is inser ted into the sync jack.

Flash OK / Flash DUMP / Flash TEST

After the unit fires (releasing the energy from the capacitors), it will begin recycling. The red

will light as the unit recycles, then the green

that the unit is ready to fire at the prescribed settings. The

adjusted from a higher to a lower power setting. The unit will automatically dump this excess charge, or

you can push the red

unit holds the correct amount of energy for the settings, and is ready to fire.

Toll Free 1-800-443-5542 Please call us if you need any assistance!

OK LED

TEST

button to dump the charge instantly. When the green

Power ON / OFF

The power ON / OFF switch

turns the entire ringflash unit

on or off and additionally has a

built-in 6 amp circuit breaker.

will light to indicate that the recycle is complete and

DUMP LED

will also light whenever the unit is

DUMP LED

OK LED

comes on, the