Mount Your zūmo in an Automobile
Before mounting the zūmo, see the Important Safety and Product Information guide in the product box
Before mounting the zūmo, see the Important Safety and Product Information guide in the product box
for information about laws pertaining to windshield mounting.
for information about laws pertaining to windshield mounting.
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
vehicle when exiting or store it out of direct sunlight.
1. Plug the automotive power cable into the connector on the right side of the cradle.
Microphone
Microphone
jack (2.5 mm)
jack (2.5 mm)
2. Remove the clear plastic from the suction cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
3. Place the suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Snap the cradle onto the suction cup arm.
6. Fit the bottom of your zūmo into the cradle.
7. Tilt the zūmo back until it snaps into place.
8. Plug the other end of the automotive power cable into a power outlet.
9. If you are using a traffic receiver in Europe, secure the antenna on the traffic
receiver to the windshield using the suction cups.
© 2008 Garmin Ltd. or its subsidiaries
Garmin
and zūmo
®
®
other countries. These trademarks may not be used without the express permission of Garmin. Other
trademarks and trade names are those of their respective owners.
January 2009
are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and
Part Number 190-01026-02 Rev. A
Release button
Release button
Automotive
Automotive
Cradle
Cradle
power cable
power cable
Suction cup
mount
Warning: Do not use
the suction cup mount on a
motorcycle.
www.garmin.com
Printed in Taiwan
Pagina afdrukken