Garmin vivomove HR Gebruikershandleiding - Pagina 13
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin vivomove HR. Garmin vivomove HR 16 pagina's.
Pagina afdrukken
• Synchronize your step count with the Garmin Connect
Mobile app
(Syncing Your Data with the Garmin Connect
Mobile App, page
6).
2
Wait while the device synchronizes your data.
Synchronizing can take several minutes.
NOTE: Refreshing the Garmin Connect Mobile app or the
Garmin Connect application does not synchronize your data
or update your step count.
My stress level does not appear
Before the device can detect your stress level, wrist-based heart
rate monitoring must be turned on.
The device samples your heart rate variability throughout the
day during periods of inactivity to determine your stress level.
The device does not determine your stress level during timed
activities.
If dashes appear instead of your stress level, be still, and wait
while the device measures your heart rate variability.
My intensity minutes are flashing
When you exercise at an intensity level that qualifies toward
your intensity minutes goal, the intensity minutes flash.
Exercise for at least 10 consecutive minutes at a moderate or
vigorous intensity level.
The floors climbed amount does not seem accurate
Your device uses an internal barometer to measure elevation
changes as you climb floors. A floor climbed is equal to 3 m
(10 ft.).
• Avoid holding handrails or skipping steps while climbing
stairs.
• In windy environments, cover the device with your sleeve or
jacket as strong gusts can cause erratic readings.
Tips for Erratic Heart Rate Data
If the heart rate data is erratic or does not appear, you can try
these tips.
• Clean and dry your arm before putting on the device.
• Avoid wearing sunscreen, lotion, and insect repellent under
the device.
• Avoid scratching the heart rate sensor on the back of the
device.
• Wear the device above your wrist bone. The device should
be snug but comfortable.
• Warm up for 5 to 10 minutes and get a heart rate reading
before starting your activity.
NOTE: In cold environments, warm up indoors.
• Rinse the device with fresh water after each workout.
• While exercising, use a silicone band.
My device does not display the correct time
The device updates the time and date when you sync your
device to a computer or mobile device. You should sync your
device to receive the correct time when you change time zones,
and to update for daylight saving time.
If the watch hands do not match the digital time, you should
manually calibrate the watch hands
Hands, page
9).
1
Confirm that your computer or mobile device displays the
correct local time.
2
Select an option:
• Sync your device to a computer
Your Computer, page
• Sync your device to a mobile device
with the Garmin Connect Mobile App, page
Troubleshooting
(Calibrating the Watch
(Syncing Your Data with
6).
(Syncing Your Data
6).
The time and date are updated automatically.
Calibrating the Watch Hands
If the watch hands do not match the digital time, you should
manually calibrate the watch hands.
1
Hold the touchscreen to view the menu.
2
Select
>
> Calibrate Hands.
3
Tap or until the minute hand points to the 12 o'clock
position.
4
Select
.
5
Tap or until the hour hand points to the 12 o'clock position.
6
Select Done.
Maximizing Battery Life
• Decrease the screen brightness and timeout
Settings, page
6).
• Turn off wrist gestures
(Display Settings, page
• In your smartphone notification center settings, limit the
notifications that appear on your vívomove HR device
(Managing Notifications, page
• Turn off smart notifications
• Turn off Bluetooth wireless technology when you are not
using connected features
• Stop broadcasting heart rate data to paired Garmin devices
(Broadcasting Heart Rate Data to Garmin
• Turn off wrist-based heart rate monitoring
Monitor Settings, page
6).
NOTE: Wrist-based heart rate monitoring is used to calculate
vigorous intensity minutes, VO2 max., stress level, and
calories burned.
My device display is difficult to see outside
The device detects ambient light and automatically adjusts the
backlight brightness to maximize battery life. In direct sunlight,
the screen gets brighter, but it may still be difficult to read. The
automatic activity detection feature can be helpful when starting
outdoor activities
(Device Settings on Your Garmin Connect
Account, page
7).
Restoring All Default Settings
You can restore all of the device settings back to the factory
default values.
NOTE: This deletes all user-entered information and activity
history.
1
Hold the touchscreen to view the menu.
2
Select
>
> Restore Defaults >
Product Updates
On your computer, install Garmin Express
/express). On your smartphone, install the Garmin Connect
Mobile app.
This provides easy access to these services for Garmin devices:
• Software updates
• Data uploads to Garmin Connect
• Product registration
Updating the Software Using Garmin
Express
Before you can update your device software, you must
download and install the Garmin Express application and add
your device
(Syncing Your Data with Your Computer, page
1
Connect the device to your computer using the USB cable.
(Display
6).
5).
(Bluetooth Settings, page
(Bluetooth Settings, page
6).
Devices, page
®
(Wrist Heart Rate
.
(www.garmin.com
6).
4).
6).
9