Garmin GTS 8000 vervangen - Pagina 7

Blader online of download pdf vervangen voor {categorie_naam} Garmin GTS 8000. Garmin GTS 8000 16 pagina's. For citation m2, garmin g3000 software version 10
Ook voor Garmin GTS 8000: Handleiding voor piloten (26 pagina's)

Pagina afdrukken

Section 3

Aircraft Configuration

• Place the G3000 back in configuration by pressing and hold the #12 softkey on the PFD 1

and pushing in the L PFD circuit breaker. Let go when you see initializing.

• Transponder and TCAS Configuration:

o Rotate the inner right knob to go to the Aircraft Configuration page.

o Push the FMS knob to activate it.

o The cursor should be on the Aircraft Registration line. Rotating the small FMS

knob provides a single character cursor. Use the small knob to change the value,

and the large knob to move to the next character.

 U.S. registered aircraft:

 Foreign registered aircraft:

 Select the softkey labeled SET GTX1 to program #1 GTX-3000. Select OK to

 Select the softkey labeled SET GTX2 to program #2 GTX-3000. Select OK to

 Select the softkey labeled SET GTS to program the GTS-8000. Select OK to

Version 1.0

• Enter the aircraft tail number using the FMS knob to select

characters.

• The VFR code should be set to 1200.

• Press Enter.

• Note that the Hexadecimal code will need to be entered first.

• Then the tail number should be entered.

• Also the VFR code will need to be set to the correct value for the

country of registry.

• Press Enter.

acknowledge.