Garmin GPS 190-01219-91 Handleiding voor installatie-instructies - Pagina 5

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPS 190-01219-91. Garmin GPS 190-01219-91 36 pagina's. Chartplotter

Pagina afdrukken

to connect the wiring harness to a nMEa 0183 device:

1. For Garmin devices, the ground (black) wires serve as NMEA 0183 ground and must be attached together or on the same terminal as the

NMEA 0183 ground on your NMEA 0183 device. Refer to the wiring diagram of your NMEA 0183 device for wire identification.

2. Connect the blue (NMEA 0183 port 1 out) wire from the GPS 152H wiring harness to the NMEA 0183 in (or Rx/A +) wire on the wiring

harness of the NMEA 0183 device, and the brown (NMEA 0183 port 1 in) wire to the NMEA out (or Tx/A +) wire on the wiring harness of the

NMEA 0183 device.

3. Repeat step 2 using the blue and white wires for an additional NMEA 0183 device.

4. Set the serial port(s) on the GPS 152H to use NMEA 0183 data. See the GPS 152H Owner's Manual for more information.

Connecting the Wiring Harness to an optional Horn, Lamp, or Both

The GPS 152H device can be used with a lamp, a horn, or both, to sound or flash an alert when the device displays a message. The alarm does

not need to be wired for the GPS 152H to function. The alarm circuit switches to a low-voltage state when the alarm sounds. It is necessary to

install a relay that limits the current from the device to 100 mA. To manually toggle visual and audible alerts, install single-pole, single-throw

switches.

medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or

other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must

contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without

obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental

information concerning the use and operation of this and other Garmin products.

Garmin

and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the

express permission of Garmin.

GPS 152H Installation Instructions

GPS 152H device

Wiring a GPS 152H Device to a Horn, a Lamp, or Both

Battery

10–0 Vdc

Wire color

Fuse

1.5 A

Red

Black (ground)

Relay

100 mA max

Yellow (alarm)

coil current

Lamp

Horn