Garmin GPSMAP 2010 Handleiding voor installatie-instructies - Pagina 8
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPSMAP 2010. Garmin GPSMAP 2010 12 pagina's. Garmin gsd 20 marine-remote sounder: release note
Ook voor Garmin GPSMAP 2010: Conformiteitsverklaring (1 pagina's), Conformiteitsverklaring (1 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (20 pagina's)
Pagina afdrukken
I
I
NSTALLATION
NSTRUCTIONS
Wiring
There are two wiring diagrams provided for you convenience. The first is a simple hook-up showing the GPSMAP 2006/2010 (using the 18-
pin wiring harness), the GPS 17 and the alarm circuit. The Alarm does not have to be wired for the unit to function. The second is a complete
wiring diagram showing the GPSMAP 2006/2010 (using the 18-pin wiring harness) interfacing with a variety of different equipment. The extra
5-pin wiring harness that came with the unit is intended for future interfacing features and does not require connection. Refer to the wiring
diagram that will best suite your needs. Make sure that all connections are good. For extra lengths of wire, 24 AWG (unless otherwise noted on
wiring diagram), shielded, twisted-pair wiring is recommended. We advise soldering all connections and sealing the connection with heat shrink
tubing. If you experience difficulty wiring the unit, please contact an installation professional in your area.
GARMIN
GPSMAP 2006/2010
ACCESSORY ON
DC INPUT
ALARM
GROUND
PORT 4 OUT
PORT 4 IN
NOTE:
THE ALARM OUTPUT CAN BE USED TO DRIVE A LAMP, HORN, OR BOTH.
MAXIMUM CURRENT IS 100 MILLIAMPS. A SWITCH OR RELAY CAN BE USED
TO SELECT BETWEEN VISUAL AND AUDIBLE ALERTS, IF REQUIRED
8
WIRE
COLOR
ORANGE
5 A
18 AWG
RED
ALARM
SEE NOTE
YELLOW
18 AWG
BLACK
GREEN
WHITE
Diagram 1 - Basic Hook-up
+
SHIP'S BATTERY
10-32 VOLTS
-
GARMIN GPS 17
GPS SENSOR
WIRE
COLOR
YELLOW
ON
1 A
RED
POWER
BLACK
GROUND
COM 1 IN
BLUE
WHITE
COM 1 OUT
GPSMAP 2006C/2010C & GPS 17