Brother DCP-110C Handleiding voor snelle installatie - Pagina 6

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother DCP-110C. Brother DCP-110C 24 pagina's. Facsimile equipment
Ook voor Brother DCP-110C: Handleiding voor snelle configuratie (24 pagina's), Referentielijst onderdelen (30 pagina's), Handleiding voor snelle installatie (35 pagina's)

Pagina afdrukken
Brother DCP-110C Handleiding voor snelle installatie
Step 1
Removing the Protective
1
Parts
1
Remove the protective tape.
DO NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.

Loading Paper

2
You can load up to 100 sheets of 20 lb
paper.
For more details, see "About paper" in
Chapter 1 of the User's Guide.
1
Pull the paper tray completely out of the
machine and remove the output paper tray.
2
Press and slide the paper guide to fit the
paper width.
Paper Side Guide
4

Setting Up the Machine

3
Pull out the paper support and unfold the
paper support flap.
Paper Support Flap
Use the paper support flap for Letter, Legal
and A4 size paper.
4
Fan the stack of paper well to avoid paper
jams and mis-feeds.
5
Gently insert the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray and
below the maximum paper mark.
■ Make sure the paper side guides touch
the sides of the paper.
■ Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause paper feed problems.
6
Put the output paper tray back on and push
the paper tray firmly back into the machine.
Paper Support