Brother DCP-110C Podręcznik szybkiej konfiguracji - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Drukarka Brother DCP-110C. Brother DCP-110C 24 stron. Facsimile equipment
Również dla Brother DCP-110C: Podręcznik szybkiej konfiguracji (24 strony), Lista referencyjna części (30 strony), Podręcznik szybkiej konfiguracji (35 strony)

Step 1

Removing the Protective

Parts

Remove the protective tape.

DO NOT connect the USB cable.

Connecting the USB cable is done

when installing the driver.

You can load up to 100 sheets of 20 lb

paper.

For more details, see "About paper" in

Chapter 1 of the User's Guide.

Pull the paper tray completely out of the

machine and remove the output paper tray.

Press and slide the paper guide to fit the

paper width.

Paper Side Guide

Setting Up the Machine

Pull out the paper support and unfold the

paper support flap.

Paper Support Flap

Use the paper support flap for Letter, Legal

and A4 size paper.

Fan the stack of paper well to avoid paper

jams and mis-feeds.

Gently insert the paper into the paper tray

print side down and top edge first.

Check that the paper is flat in the tray and

below the maximum paper mark.

■ Make sure the paper side guides touch

the sides of the paper.

■ Be careful that you do not push the paper

in too far; it may lift at the back of the tray

and cause paper feed problems.

Put the output paper tray back on and push

the paper tray firmly back into the machine.

Paper Support