Brother DCP-9040CN Handleiding voor snelle installatie - Pagina 20

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother DCP-9040CN. Brother DCP-9040CN 31 pagina's. Facsimile equipment
Ook voor Brother DCP-9040CN: Brochure & specificaties (4 pagina's), Handleiding voor snelle installatie (30 pagina's), Handmatig (7 pagina's), Referentielijst onderdelen (43 pagina's), Reiniging en onderhoud (7 pagina's), Snelstarthandleiding (10 pagina's), Handleiding voor snelle installatie (20 pagina's)

Pagina afdrukken

Brother DCP-9040CN Handleiding voor snelle installatie

STEP 2

Installing the Driver & Software

For USB Interface Cable Users

For Mac OS

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 5 through 7.

Note

For Mac OS

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com/)

Remove the label covering the USB port on the

machine. Connect the interface cable to your

computer, and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

Note

Make sure that the machine is turned on by

connecting the power cord.

Turn on your Macintosh

X 10.2.4 or greater

X 10.2.0 to 10.2.3 users, upgrade to

X, visit

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

Note

Please see the Software User's Guide on the

CD-ROM to install the PS driver.

The Brother software will search for the Brother

device. During this time the following screen

will appear.

When this screen appears, click OK.

For Mac OS

X 10.3.x or greater users:

The MFL-Pro Suite, Brother printer driver,

scanner driver and Brother

ControlCenter2 have been installed and

the installation is now complete.

Go to step 11.