Fujitsu Lifebook A3040 Bios Handleiding - Pagina 7

Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu Lifebook A3040. Fujitsu Lifebook A3040 24 pagina's. Bios setup utility
Ook voor Fujitsu Lifebook A3040: Software Handleiding (29 pagina's)

Fujitsu Lifebook A3040 Bios Handleiding
Secondary Master Submenu of the Main Menu
The Secondary Master submenu identifies the characteristics of the Secondary Master device installed.
Main
Secondary Master:
Device
Vendor
LBA Mode
PIO Mode
Async DMA
Ultra DMA
Type
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
Device
Vendor
LBA Mode
PIO Mode
Async DMA
Ultra DMA
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
BIOS SETUP UTILITY
:ATAPI CDROM
:MATSHITADVD-RAM UJ841S
:Supported
:4
:MultiWord DMA-2
:Ultra DMA-2
[Auto]
v02.59 (C) Copyright 1985-2006, American Megatrends, Inc.
Figure 3. Secondary Master Submenu
Default
[Auto]
–—
M a i n M e n u
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F1: Help
Description
Selects the ATA/ATAPI device type. To change the selection, press
the spacebar. Select Auto to have the type automatically identified
by the BIOS at POST. If None is selected, all of the following Set-up
items do not appear.
These items are automatically determined by the system at POST
and display the characteristics of the Primary Master device. They
cannot be changed by the user.
Esc: Exit
7