Fujitsu Lifebook A3040 Посібник з біосу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з біосу для Ноутбук Fujitsu Lifebook A3040. Fujitsu Lifebook A3040 24 сторінки. Bios setup utility
Також для Fujitsu Lifebook A3040: Посібник з програмного забезпечення (29 сторінок)

Друкувати сторінку

Secondary Master Submenu of the Main Menu

The Secondary Master submenu identifies the characteristics of the Secondary Master device installed.

Main

Secondary Master:

Device

Vendor

LBA Mode

PIO Mode

Async DMA

Ultra DMA

Type

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

■

Type:

Auto

■

None

Device

■

Vendor

■

LBA Mode

■

PIO Mode

Async DMA

■

Ultra DMA

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to

another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit

menu. If you wish to move to another menu, use the cursor keys.

BIOS SETUP UTILITY

:ATAPI CDROM

:MATSHITADVD-RAM UJ841S

:Supported

:MultiWord DMA-2

:Ultra DMA-2

[Auto]

Figure 3. Secondary Master Submenu

Default

[Auto]

–—

M a i n M e n u

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

[None]

The drive is disabled.

F1: Help

Description

Selects the ATA/ATAPI device type. To change the selection, press

the spacebar. Select Auto to have the type automatically identified

by the BIOS at POST. If None is selected, all of the following Set-up

items do not appear.

These items are automatically determined by the system at POST

and display the characteristics of the Primary Master device. They

cannot be changed by the user.

Esc: Exit