Fujitsu PRIMERGY TX150 S6 Handleiding Service Supplement - Pagina 40
Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 pagina's.
Ook voor Fujitsu PRIMERGY TX150 S6: Opmerkingen over het gebruik (8 pagina's)
Pagina afdrukken
Board layout
5.1.2
3.5" SAS/SATA backplane
Part number: A3C40070504
You will find the 3.5" SAS/SATA backplane with 4 slots for SAS or SATA hard disk
modules located on the hard disk cage.
1
1
Connector power supply (X6)
2
I2C bus connector (X11)
3
Connector to SAS/SATA controller
(X1)
The LEDs are made visible on the front side of the mounting frames via light
conductors, which are situated at the mounting frames of the drives. The
controlling of the LEDs does only work if a driver has been loaded. The signal
of the LEDs is described in the Operating Manual.
40
2
5
3
4
4
5
6
Service Supplement
SATA LED control connector
(X12)
LEDs
SAS/SATA connectors for hard
disk drives
Appendix
6
TX150 S6