Fujitsu PRIMERGY TX150 S6 Dodatkowa instrukcja serwisowa - Strona 40
Przeglądaj online lub pobierz pdf Dodatkowa instrukcja serwisowa dla Serwer Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 stron.
Również dla Fujitsu PRIMERGY TX150 S6: Uwagi dotyczące używania (8 strony)
Drukuj stronę
Board layout
5.1.2
3.5" SAS/SATA backplane
Part number: A3C40070504
You will find the 3.5" SAS/SATA backplane with 4 slots for SAS or SATA hard disk
modules located on the hard disk cage.
1
1
Connector power supply (X6)
2
I2C bus connector (X11)
3
Connector to SAS/SATA controller
(X1)
The LEDs are made visible on the front side of the mounting frames via light
conductors, which are situated at the mounting frames of the drives. The
controlling of the LEDs does only work if a driver has been loaded. The signal
of the LEDs is described in the Operating Manual.
40
2
5
3
4
4
5
6
Service Supplement
SATA LED control connector
(X12)
LEDs
SAS/SATA connectors for hard
disk drives
Appendix
6
TX150 S6