Fujitsu PRIMERGY TX150 S6 Handleiding Service Supplement - Pagina 7
Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 pagina's.
Ook voor Fujitsu PRIMERGY TX150 S6: Opmerkingen over het gebruik (8 pagina's)
Pagina afdrukken
Introduction
Information/procedure
Extensions and upgrades:
I
For some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Extending/replacing the main memory
– Installing accessible drives, like floppy disk
drive, DVD/DVD-RW drive, multibay etc.
– Installing a hard disks extension box
– Installing a ServerView Local Service Panel
– Installing expansion boards in the PCI slots
– Installing the RAID key
– Installing the COM2 interface
– Installing the parallel interface
– Converting from standard PS to hot-plug PS
– Converting from floorstand model to rack model
Cabling
Replacement routines:
– Replacing the operating panel
– Replacing the standard PS
– Replacing the Power backplane
– Replacing the 3.5" SAS/SATA backplane
– Replacing the 2.5" SAS backplane
– Replacing the IDTEMP Combo
– Replacing the intrusion switches
– Replacing the processor
– Replacing the system board
Board layout
BIOS setup
Table 1: Overview of the documentation TX150 S6
TX150 S6
Overview of the documentation
Service Supplement
Manual
Options Guide
Service Supplement
"BIOS Setup" manual
7