Fujitsu PRIMERGY TX150 S6 Handleiding Service Supplement - Pagina 9
Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 pagina's.
Ook voor Fujitsu PRIMERGY TX150 S6: Opmerkingen over het gebruik (8 pagina's)
Pagina afdrukken
2
Procedure
V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Ê First of all please familiarize yourself with the safety instructions in the
section
chapter "Safety notes" on page 11
Ê Ensure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server, the Options Guide for the server and the Technical Manual for
the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the
page 17
et seq. .
Ê Replace the defective component as described in the relevant chapter.
I
Procedures which are identical for the floorstand and rack models are
only described for the floorstand model.
Ê Close the server.
Ê Connect the cables.
Ê Connect the server to the power outlet.
Ê Start the operating system.
Ê If necessary, configure the server as required.
1
These procedures are described in the Operating Manual.
TX150 S6
1
1
1
Service Supplement
et seq. .
chapter "Replacement routines" on
1
1
9