Fujitsu PRIMERGY TX300 S3 Handleiding Service Supplement - Pagina 21

Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY TX300 S3. Fujitsu PRIMERGY TX300 S3 47 pagina's.

Replacement routines

The Power backplane in the floorstand model is positioned directly under

the top cover and it makes sense to lay the server on a table with the

uncovered side facing upward. Place the server in such a way that the

feet can project over the edge.

Figure 3: Removing the PS safe guard

CAUTION!

Before removing the PS safe guard, the server must be disconnected to

the main voltage because of energy hazard on the Power backplane.

Ê Remove the screw (see the circle) and take out the PS safe guard.

Ê Disconnect all power cables from the Power backplane.

Ê Remove the four screws of the PS cage at the rear side of the server and

pull out the PS cage.

TX300 S3

Replacing the Power backplane

Service Supplement