Fujitsu fi-5530C - Document Scanner Aan de slag - Pagina 11

Blader online of download pdf Aan de slag voor {categorie_naam} Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 28 pagina's. Color departmental scanner
Ook voor Fujitsu fi-5530C - Document Scanner: Handleiding voor installatieprocedures (7 pagina's), Handleiding voor installatieprocedures (9 pagina's), Installatieprocedures (3 pagina's), Aan de slag (28 pagina's), Brochure & specificaties (2 pagina's), Specificaties (2 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (14 pagina's), Handleiding reinigingsinstructies (13 pagina's), Gebruiksaanwijzing (10 pagina's)

Pagina afdrukken

Fujitsu fi-5530C - Document Scanner Aan de slag

Chapter2

2.1 Installing the Scanner

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to the fi-5530C

Operator's Guide "7.2 Installation Specifications"

on the Setup CD-ROM.

2. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into

the corresponding slots in the scanner as shown in

the figure below.

The Side guides of the ADF paper chute have to

face up.

ADF paper chute

Side guide

3. Connect the AC adapter.

Use only the AC adapter provided by the

ATTENTION

manufacturer.

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

INSTALLATION OF THE SCANNER

Tab

fi-5530C Image Scanner Getting Started

3) Plug the AC cable into the outlet.

The Function Number Display and the LED

HINT

may flash for an instant when plugging the

AC cable into the outlet.

2.2 Connecting the Scanner to

Your PC

When running Windows 95 or Windows NT 4.0, con-

nect the scanner with the SCSI interface cable.

When running Windows 98, Windows Me, Windows

2000, or Windows XP, connect either with the USB

interface cable or the SCSI interface cable.

This scanner is provided with two inter-

ATTENTION

faces: Ultra SCSI and USB 2.0 /1.1. Con-

nect only one of the USB or SCSI interface

cable. Windows 95 and Windows NT 4.0

do not support USB interface.

■ Connecting with the USB

Interface Cable

1. Connect the USB interface cable to the USB

interface connector.