Fujitsu fi-5530C - Document Scanner Начало работы - Страница 11

Просмотреть онлайн или скачать pdf Начало работы для Сканер Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 28 страниц. Color departmental scanner
Также для Fujitsu fi-5530C - Document Scanner: Руководство по процедурам установки (7 страниц), Руководство по процедурам установки (9 страниц), Процедуры установки (3 страниц), Начало работы (28 страниц), Брошюра и технические характеристики (2 страниц), Технические характеристики (2 страниц), Инструкции по замене и очистке расходных материалов (14 страниц), Инструкция по очистке Руководство (13 страниц), Руководство по эксплуатации (10 страниц)

Печатать страницу
Fujitsu fi-5530C - Document Scanner Начало работы
Chapter2

2.1 Installing the Scanner

1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to the fi-5530C
Operator's Guide "7.2 Installation Specifications"
on the Setup CD-ROM.
2. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into
the corresponding slots in the scanner as shown in
the figure below.
The Side guides of the ADF paper chute have to
face up.
ADF paper chute
Side guide
3. Connect the AC adapter.
Use only the AC adapter provided by the
ATTENTION
manufacturer.
1) Connect the AC cable to the AC adapter.
2) Connect the AC adapter connector to the scan-
ner's DC inlet.
INSTALLATION OF THE SCANNER
Tab
fi-5530C Image Scanner Getting Started
3) Plug the AC cable into the outlet.
The Function Number Display and the LED
HINT
may flash for an instant when plugging the
AC cable into the outlet.
2.2 Connecting the Scanner to
Your PC
When running Windows 95 or Windows NT 4.0, con-
nect the scanner with the SCSI interface cable.
When running Windows 98, Windows Me, Windows
2000, or Windows XP, connect either with the USB
interface cable or the SCSI interface cable.
This scanner is provided with two inter-
ATTENTION
faces: Ultra SCSI and USB 2.0 /1.1. Con-
nect only one of the USB or SCSI interface
cable. Windows 95 and Windows NT 4.0
do not support USB interface.
■ Connecting with the USB
Interface Cable
1. Connect the USB interface cable to the USB
interface connector.
3