Fujitsu FI-5900C Aan de slag - Pagina 21

Blader online of download pdf Aan de slag voor {categorie_naam} Fujitsu FI-5900C. Fujitsu FI-5900C 30 pagina's. Consumable replacement and cleaning instructions
Ook voor Fujitsu FI-5900C: Aan de slag (30 pagina's), Handleiding voor installatieprocedures (7 pagina's), Handleiding voor installatieprocedures (9 pagina's), Installatieprocedures (3 pagina's), Brochure & specificaties (2 pagina's), Aanvullende handleiding (4 pagina's), Brochure & specificaties (4 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (24 pagina's), Vervangingsprocedure (22 pagina's), Reinigingsinstructies (2 pagina's)

Select a scanner in the displayed dialog box.

To use FUJITSU TWAIN 32:

Select [FUJITSU fi-5900Cdj], and then click the

[Select] button.

To use FUJITSU ISIS:

Select [Fujitsu fi-5900C], and then click the [Select]

button.

Select [Scan] on the menu, and then select [Scan

Settings].

In the [Scan Settings] dialog box, clear the [Save to

file] checkbox.

You only check the operation now, so you do

HINT

not have to save to file.

10. Click [Scanner Settings].

⇒

A setup dialog box appears for you to configure

scanner driver settings.

11. Configure scanner settings such as the resolution

and paper size.

To use FUJITSU TWAIN 32:

On the dialog box below, configure scan settings, and

then click the [OK] button.

To use FUJITSU ISIS:

On the dialog box below, configure scanning settings,

and then click the [OK] button.

⇒

12. Click the [Scan] button.

HINT

⇒

If the scanned document image is displayed in the window, it

means that the scanner driver is installed properly.

For further information about how to scan documents, refer to

the "fi-5900C Operator's Guide" contained in the Setup CD-

ROM.

fi-5900C Image Scanner Getting Started

You are returned to the [Scan Settings] dialog box.

When you are using FUJITSU TWAIN 32, you

may see the TWAIN Driver setup dialog box

again. If so, click the [Scan] button on the

dialog box.

The document is scanned and the scanned image is

displayed in the [ScandAll PRO] window.