Fujitsu FI-5900C 시작하기 - 페이지 21

{카테고리_이름} Fujitsu FI-5900C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5900C 30 페이지. Consumable replacement and cleaning instructions
Fujitsu FI-5900C에 대해서도 마찬가지입니다: 시작하기 (30 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 보충 설명서 (4 페이지), 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 교체 절차 (22 페이지), 청소 지침 (2 페이지)

페이지 인쇄
Fujitsu FI-5900C 시작하기
7.
Select a scanner in the displayed dialog box.
To use FUJITSU TWAIN 32:
Select [FUJITSU fi-5900Cdj], and then click the
[Select] button.
To use FUJITSU ISIS:
Select [Fujitsu fi-5900C], and then click the [Select]
button.
8.
Select [Scan] on the menu, and then select [Scan
Settings].
9.
In the [Scan Settings] dialog box, clear the [Save to
file] checkbox.
You only check the operation now, so you do
HINT
not have to save to file.
10. Click [Scanner Settings].
⇒
A setup dialog box appears for you to configure
scanner driver settings.
11. Configure scanner settings such as the resolution
and paper size.
To use FUJITSU TWAIN 32:
On the dialog box below, configure scan settings, and
then click the [OK] button.
To use FUJITSU ISIS:
On the dialog box below, configure scanning settings,
and then click the [OK] button.
⇒
12. Click the [Scan] button.
HINT
⇒
If the scanned document image is displayed in the window, it
means that the scanner driver is installed properly.
For further information about how to scan documents, refer to
the "fi-5900C Operator's Guide" contained in the Setup CD-
ROM.
fi-5900C Image Scanner Getting Started
You are returned to the [Scan Settings] dialog box.
When you are using FUJITSU TWAIN 32, you
may see the TWAIN Driver setup dialog box
again. If so, click the [Scan] button on the
dialog box.
The document is scanned and the scanned image is
displayed in the [ScandAll PRO] window.
13