Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 22

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's), Configuratiehandleiding (24 pagina's)

Pagina afdrukken

Fujitsu ETERNUS DX Disk Configuratiehandleiding

Chapter 6

Required Driver Parameters

6.1

Setting Up the Parameters

The parameters in the "/kernel/drv/fjpfca.conf" configuration file need to be edited as described below.

Original configuration file must be backed up before editing.

Example:

cp /kernel/drv/fjpfca.conf ./ fjpfca.conf.backup

Edit the configuration file according to the following parameter list.

6.1.1

"fjpfca.conf" Parameter Values

•

These settings are common for all Solaris 10 OS, Solaris 9 OS, and Solaris 8 OS versions.

Comment out any items that are not required by putting a "#" at the beginning of the line.

•

Setting value (for

Parameter

direct connection)

alias

Set if required

port

Not required

fcp-bind-

Not required

target

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

Setting value

Remarks

(for switch connec-

tion)

Set if required

Set an alias name for the WWN.

It is easier to edit the setting files if this alias name is set.

nport

Link speed may be set to a fixed value. (*1)

Set the topology and link speed.

port="<Instance name>:<Topology>:<Link speed>"

The following <topology> parameters may be used:

nport: Switch connection

loop: Direct connection

The following <link speed> parameters may be used:

sp1 for 1Gbit/s links

sp2 for 2Gbit/s links

sp4 for 4Gbit/s links

See remarks

Binds the instance and the ETERNUS DX/AF storage systems' CA

port together.

fcp-bind-target="<Instance name>t<SCSI target ID>:<alias name>"

(<WWN> can be used instead of the <alias name>.)

P3AM-3712-15ENZ0