Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 22

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 32 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's), Configuratiehandleiding (24 pagina's)

Pagina afdrukken

Fujitsu ETERNUS DX Disk Configuratiehandleiding

Chapter 8

Setting Up XenServer

8.1

Setting Up the Fibre Channel Cards

Perform the following driver parameter settings for each model of ETERNUS DX/AF that is to be connec-

ted.

Parameter

Connection Options

Data Rate

Frame Size

Hard Loop ID

Loop Reset Delay (seconds)

Enable Host HBA BIOS

Enable Hard Loop ID

Enable FC Tape Support

Operation Mode

Interrupt Delay Timer (100ms)

Execution Throttle

Port Down Retry Count

Enable LIP Full Login

Link Down Timeout (seconds)

Enable Target Reset

LUNs Per Target

Enable Receive Out Of Order Frame

*1: Use the following "Data Rate" setting values

Fibre

Channel

card

transfer

rate

32Gbit/s

16Gbit/s

8Gbit/s

4Gbit/s

Add the following line to the /etc/modprobe.conf configuration file and set the QueueDepth value.

options qla2xxx ql2xmaxqdepth=X

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

Setting value

QLE2560/QLE2562

0 (direct connection)

1 (switch connection)

(*1)

2048

Disabled

65535

Enabled

128

Disabled

Switch connection

Fibre Channel switch transfer rate

32Gbit/s

16Gbit/s

8Gbit/s

—

Remarks

If the current parameter values are dif-

ferent, change them to the indicated

values.

Direct connection

CA transfer rate

4Gbit/s

2Gbit/s

32Gbit/s

—

16Gbit/s

8Gbit/s

4Gbit/s

—

XenServer

P3AM-4572-19ENZ0