Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 15

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 21 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (24 pagina's)

Chapter 2

Setup Procedure for QLogic Converged Network Adapter Cards

2.3

Installing the Converged Network Adapter Card Driver

To achieve maximum system performance, this value can be changed according to the server

•

load and the peak operating times.

•

The number of simultaneous command executions per CA port for the ETERNUS DX is limited to

1024. This value is used by multiple servers that share the CA port. A maximum of 1024 com-

mands can be executed per CA port.

Press the [Esc] key twice to return to the [Fast!UTIL Options] menu.

If the BIOS settings were changed, save the settings using [Save xxxxxx]. When two or more Converged

Network Adapter cards are installed in the server, select the second or later Converged Network Adapter

card using the following steps, and set the BIOS of the selected card.

(1)

Select [Select Host Adapter] from the [Fast!UTIL Options] menu and press the [Enter] key.

(2)

Select the Converged Network Adapter card to be set (BIOS setting) in the [Select Host Adapter]

window.

The [Fast!UTIL Options] menu appears. Then perform

Select [Exit Fast!UTIL] and press the [Enter] key.

Select [Reboot System] and press the [Enter] key.

The server reboots.

To return to the [Fast!UTIL] menu, select [Return to Fast!UTIL].

2.3

Installing the Converged Network Adapter Card Driver

Check whether the Converged Network Adapter card driver is the OS standard driver or not. If the Converged

Network Adapter card requires a non-standard driver, check the driver versions using the "Server Support Ma-

trix".

When the Converged Network Adapter card requires a standard kernel package driver

•

The standard add-on driver for the OS should be used.

When the Converged Network Adapter card requires a non-standard driver

•

Download and install the driver specified in the "Server Support Matrix" from the QLogic Corp. web-site.

Refer to the QLogic Converged Network Adapter card manual for details on the installation method.

Exit Fast!UTIL

Reboot System

Return to Fast!UTIL

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for Linux

Step 3

through

Step

10.

P3AM-6402-11ENZ0