Fujitsu ETERNUS DX200 S3 Configuratiehandleiding Serververbinding - Pagina 8

Blader online of download pdf Configuratiehandleiding Serververbinding voor {categorie_naam} Fujitsu ETERNUS DX200 S3. Fujitsu ETERNUS DX200 S3 12 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu ETERNUS DX200 S3: Configuratiehandleiding Serververbinding (12 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (13 pagina's), Configuratiehandleiding (18 pagina's), Installatiehandleiding (15 pagina's), Veiligheidsmaatregelen (12 pagina's)

Chapter 2

Setting Up the ETERNUS DX

2.1

This section explains the settings required for all server OSes, regardless of the connection configuration.

See the "ETERNUS Web GUI User's Guide" for details of how to set up and operate ETERNUS Web GUI.

2.1.1

For each connection configuration, set the indicated items only. All other parameters should be left on their

default values.

Table 2.1 FCoE port parameter settings

Parameter

Transfer Rate

Frame Size

Reset Scope

Release Reservation if Chip is Reset

Make sure to prepare and set up FCoE switches. For further details, refer to "Fabric OS Administrator's

Guide Supporting Fabric OS".

2.1.2

Create LUN groups (Affinity Group) for the server to access. Refer to "Connectivity Management" in "ETERNUS

Web GUI User's Guide" for details, and set the LUN groups.

When the server OS is Windows

ascending order. The server cannot recognize the ETERNUS DX LUNs unless they are assigned in this order.

This restriction does not apply when the server is running a Solaris OS.

, Linux, or VMware ESX, assign LUN Group values starting from LUN0 in

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

Solaris OS, Windows

, Linux, VMware ESX

10 Gbit/s

2048 bytes (Default value)

I_T_L

Disable

P3AM-7982-05ENZ0