Fujitsu Eternus DX200F Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 10 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu Eternus DX200F: Bedieningshandleiding (48 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (13 pagina's), Configuratiehandleiding (16 pagina's), Configuratiehandleiding (38 pagina's), Veiligheidsmaatregelen (12 pagina's)

Pagina afdrukken
Fujitsu Eternus DX200F Installatiehandleiding

RAID Configuration Settings

7
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
●
RAID group creation
●
Volume creation
●
Hot spare registration
1.
RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click [Create] in [Action] on the [RAID Group] tab.
2.
Volume creation
Create volumes in the RAID group.
To display the screen to create volumes.
Click [Create] in [Action] on the [Volume] tab.
3.
Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click [Drives] in [Category] on the [Component] tab.
●
Global Hot Spare registration
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS] in
[Action]. In the confirmation screen that appears,
click the [OK] button.
●
Dedicated Hot Spare registration
Select the drive that is to be registered as the
Dedicated Hot Spare and click
[Assign Dedicated HS] in [Action].
Select the RAID group that is used as the Dedicated
Hot Spare and click the [Assign] button. In the
confirmation screen that appears, click the [OK]
button.
FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide
6
Copyright 2014 FUJITSU LIMITED
P3AM-8482-01ENZ0