- ページ 6
ストレージ Fujitsu Eternus DX200FのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Eternus DX200F 10 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX200F にも： 操作マニュアル (48 ページ), 設定マニュアル (28 ページ), 設定マニュアル (13 ページ), 設定マニュアル (16 ページ), 設定マニュアル (38 ページ), 安全上のご注意 (12 ページ)
ページを印刷する
RAID Configuration Settings
7
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
●
RAID group creation
●
Volume creation
●
Hot spare registration
1.
RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click [Create] in [Action] on the [RAID Group] tab.
2.
Volume creation
Create volumes in the RAID group.
To display the screen to create volumes.
Click [Create] in [Action] on the [Volume] tab.
3.
Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click [Drives] in [Category] on the [Component] tab.
●
Global Hot Spare registration
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS] in
[Action]. In the confirmation screen that appears,
click the [OK] button.
●
Dedicated Hot Spare registration
Select the drive that is to be registered as the
Dedicated Hot Spare and click
[Assign Dedicated HS] in [Action].
Select the RAID group that is used as the Dedicated
Hot Spare and click the [Assign] button. In the
confirmation screen that appears, click the [OK]
button.
FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide
6
Copyright 2014 FUJITSU LIMITED
P3AM-8482-01ENZ0