Brother 2 Handmatig - Pagina 12
Blader online of download pdf Handmatig voor {categorie_naam} Brother 2. Brother 2 39 pagina's. Hewlett-packard laser printer user guide
Ook voor Brother 2: Gebruikershandleiding (15 pagina's)
b
While squeezing the adjustment lever, slide the right
guide plate against the roll to correctly align the left edge
of the material.
a Adjustment lever
Note
• The material is correctly loaded when there is a gap of
about 2 to 3 mm between the guide plate and the right side
of the roll. After aligning the left edge of the material, adjust
the guide plate.
a Gap of about 2 to 3 mm
1
1
Checking the End of the Material
Make sure that the end of the material is evenly trimmed to
meet all of the following conditions.
a It must be straight.
b The edges of the material must each come to right angles.
If both 1 and 2 above are not met, it may not be possible to
feed correctly.
Be sure to check before feeding.
11