Brother MFC-790CW Handleiding voor snelle installatie - Pagina 16
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother MFC-790CW. Brother MFC-790CW 44 pagina's. Quick setup guide - spanish
Ook voor Brother MFC-790CW: (Engels) Snelle configuratiegids (50 pagina's)
Pagina afdrukken
USB
For USB Interface Users (For Mac OS
14
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
be logged on with Administrator rights.
Important
®
• For Mac OS
X 10.2.0 to 10.2.3 users,
upgrade to Mac OS
the latest information for Mac OS
http://solutions.brother.com/)
• Make sure there are no memory cards or a
USB Flash memory drive inserted.
15
Connect the USB cable
Important
• DO NOT connect the machine to a non-
powered USB hub.
• Connect the machine directly to your
®
Macintosh
.
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
16
®
is ON. You must
®
X 10.2.4 or greater. (For
®
X, visit
Macintosh
®
X 10.2.4 or greater)
b
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine on the right as
shown below.
LAN
USB
c
Carefully guide the USB cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then connect the cable to your Macintosh
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
b
and close the scanner cover c.
down
2
®
symbol. You will find the
®
.
1
3