Brother MFC490CW - Color Inkjet - All-in-One Aansluithandleiding - Pagina 3
Blader online of download pdf Aansluithandleiding voor {categorie_naam} Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 6 pagina's. Mac network connection
Ook voor Brother MFC490CW - Color Inkjet - All-in-One: Handleiding voor snelle installatie (48 pagina's), Handleiding voor snelle installatie (47 pagina's), Installatie en installatie (5 pagina's), Instructies voor reparatie (2 pagina's)
![Brother MFC490CW - Color Inkjet - All-in-One Aansluithandleiding](/uploads/products/server2/2458849/2458849.png)
MFC490CW Vista Network Connection Repair Instructions
2. Type: CONTROL PRINTERS and click OK.
3. Right click on the Brother printer and left click on PROPERTIES. The Brother printer driver properties
screen will now appear.
4. Click the PORTS tab.
5. You will see a list of the available communication ports on your PC (Ex: LPT1:, LPT2:, COM1:, ETC)
Make a note of the current port. It should be set for the IP address or Node name of the Brother
machine.
6. Click ADD PORT.
7. Choose STANDARD TCP/IP PORT then click NEW PORT. The Standard TCP/IP Printer Port Wizard will
appear.
8. Click NEXT.
9. In the field labeled PRINTER NAME OR IP ADDRESS, type the IP address of your Brother machine from
the Network Configuration sheet you printed in STEP 2. Click NEXT.
NOTE: If you receive an error stating that a port with that name already exists, click OK.
Then in the PORT NAME field, slightly modify the auto-filled name of the port. For example,
change
the port name from IP_192.168.1.100 to IP_192.168.1.100a. (Note: The actual
port name
will depend on the IP address for your Brother machine).
10. a. If you receive a window requesting ADDITIONAL PORT INFORMATION, then the computer is not
communicating properly with the Brother machine. Some common causes are firewalls and security
applications, a conflict with another application running on the computer, or an IP conflict with another
device on the network. Try to troubleshoot or eliminate as many of these factors as possible. Contact
your computer manufacturer or network admin to further troubleshoot network communication
conflicts.
b. If you receive a window stating, Completing the Add Standard TCP/IP Printer Port Wizard, look for
the section labeled ADAPTER TYPE. If the communication is successful, this section should indicate
that the computer is communicating with a Brother Print Server or will list the node name of the
Brother machine (displayed as BRN or BRW followed by a combination of letters and numbers.) Click
FINISH.
11. Click CLOSE.
12. Click APPLY. Click the GENERAL TAB.
13. Click PRINT TEST PAGE. A test page should now print correctly. If the test page does not print, click
OK and close the PRINTER PROPERTIES window. Right click on the printer, then left click on CANCEL
ALL DOCUMENTS and continue on to reestablish a network connection.
PART 7: ESTABLISH A WIRELESS CONNECTION:
1. Before you begin, please gather the wireless network settings of your access point or wireless router.
This information can be found on the network configuration page of your wireless router or Access
Point. Please refer to the router or access point's user guide for instructions on accessing the network
configuration page. This information includes:
a. SSID (Service Set ID or Network name): Your Access Point or Wireless Routers are identified
by an SSID or Network Name.
b. Authentication (Open System or Shared Key)/Encryption Type (None or WEP)
c.
WEP Key (If needed)
3
© 1995 - 2010 Brother International Corporation
www.brother-usa.com