Brother MFC490CW - Color Inkjet - All-in-One Manual de ligação - Página 3

Procurar online ou descarregar pdf Manual de ligação para Software Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 6 páginas. Mac network connection
Também para Brother MFC490CW - Color Inkjet - All-in-One: Manual de configuração rápida (48 páginas), Manual de configuração rápida (47 páginas), Configuração e instalação (5 páginas), Instruções de reparação (2 páginas)

MFC490CW Vista Network Connection Repair Instructions

2. Type: CONTROL PRINTERS and click OK.

3. Right click on the Brother printer and left click on PROPERTIES. The Brother printer driver properties

screen will now appear.

4. Click the PORTS tab.

5. You will see a list of the available communication ports on your PC (Ex: LPT1:, LPT2:, COM1:, ETC)

Make a note of the current port. It should be set for the IP address or Node name of the Brother

machine.

6. Click ADD PORT.

7. Choose STANDARD TCP/IP PORT then click NEW PORT. The Standard TCP/IP Printer Port Wizard will

appear.

8. Click NEXT.

9. In the field labeled PRINTER NAME OR IP ADDRESS, type the IP address of your Brother machine from

the Network Configuration sheet you printed in STEP 2. Click NEXT.

NOTE: If you receive an error stating that a port with that name already exists, click OK.

Then in the PORT NAME field, slightly modify the auto-filled name of the port. For example,

change

the port name from IP_192.168.1.100 to IP_192.168.1.100a. (Note: The actual

port name

will depend on the IP address for your Brother machine).

10. a. If you receive a window requesting ADDITIONAL PORT INFORMATION, then the computer is not

communicating properly with the Brother machine. Some common causes are firewalls and security

applications, a conflict with another application running on the computer, or an IP conflict with another

device on the network. Try to troubleshoot or eliminate as many of these factors as possible. Contact

your computer manufacturer or network admin to further troubleshoot network communication

conflicts.

b. If you receive a window stating, Completing the Add Standard TCP/IP Printer Port Wizard, look for

the section labeled ADAPTER TYPE. If the communication is successful, this section should indicate

that the computer is communicating with a Brother Print Server or will list the node name of the

Brother machine (displayed as BRN or BRW followed by a combination of letters and numbers.) Click

FINISH.

11. Click CLOSE.

12. Click APPLY. Click the GENERAL TAB.

13. Click PRINT TEST PAGE. A test page should now print correctly. If the test page does not print, click

OK and close the PRINTER PROPERTIES window. Right click on the printer, then left click on CANCEL

ALL DOCUMENTS and continue on to reestablish a network connection.

PART 7: ESTABLISH A WIRELESS CONNECTION:

1. Before you begin, please gather the wireless network settings of your access point or wireless router.

This information can be found on the network configuration page of your wireless router or Access

Point. Please refer to the router or access point's user guide for instructions on accessing the network

configuration page. This information includes:

a. SSID (Service Set ID or Network name): Your Access Point or Wireless Routers are identified

by an SSID or Network Name.

b. Authentication (Open System or Shared Key)/Encryption Type (None or WEP)

WEP Key (If needed)