Brother PE-DESIGN Ver.8.0 Installatiehandleiding - Pagina 8
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Brother PE-DESIGN Ver.8.0. Brother PE-DESIGN Ver.8.0 16 pagina's. Personal embroidery design software system
Pagina afdrukken
[STEP1] Installing the Software
This section describes how to install the application software.
a
Note:
• If the installation is interrupted or not performed as described, the software will not be installed
correctly.
• Before turning on the computer, be sure that the USB card writer module is DISCONNECTED.
• In order to install the software, you must log on to the computer using an account with administrator
privileges. If you are not logged on with the Administrator account, the password for the
Administrator account (Administrators) may be requested with Windows
to continue the procedure.
1.
Insert the enclosed CD-ROM into the computer's CD-ROM drive.
®
Windows
→ After a short while, the language selection dialog box for InstallShield Wizard automatically appears.
Continue with step
b
Memo:
If the installer does not automatically start up:
1) Click the Start button.
2) Click Run.
→ The Run dialog box appears.
3) Type in the full path to the installer, and then click OK to start up the installer.
For example: D:\setup.exe (where "D:" is the name of the CD-ROM drive)
6
XP users only
4.
on page 8.
Before Use
®
7. Type in the password