Fujitsu YOKOGAWA AF221 Toepassingsnotitie - Pagina 15

Blader online of download pdf Toepassingsnotitie voor {categorie_naam} Fujitsu YOKOGAWA AF221. Fujitsu YOKOGAWA AF221 24 pagina's. Flash programmer - f2mc-16lx family 16-bit microcontroller all series

Pagina afdrukken

FLASH PROGRAMMER YOKOGAWA AF220/221

Software – Remote Controller AZ290

7 Software – Remote Controller AZ290

This chapter describes how to remote control the Yokogawa Flash-Programmer by a PC

The Remote Software Package AZ290 allows to set-up and to control the Flash-Programmer

by a PC.

Connect the Flash programmer AF220/221 via RS-232C or Ethernet to the PC. If the

Ethernet wants to be used, refer to the user-manual how to set-up the IP-address.

Start the Remote-Software AZ290. The software should automatically find the programmer.

7.1 Parameter Load

The parameter file contents the microcontroller-related information like e.g. Flash-Memory

size.

In order to load a new microcontroller series, open the tab "File Transfer" and select

"Parameter Load from HD".

After the file is successfully loaded, the MCU-type is shown on the programmers LC-display.

7.2 File transfer to PC-card

Keep in mind that the related bootloader-kernel (write control program, *.BTP) has to be

copied manually to the PC-card. This can be done by the button "File copy from HD to DOS

area" in the group "Bundle File". See chapter 5.1.1 for more details.

- 15 -

MCU-AN-390087-E-V10