Kohler K-1018 Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Kohler K-1018. Kohler K-1018 40 pagina's. Shower modules and receptors
Ook voor Kohler K-1018: Handleiding voor huiseigenaren (8 pagina's)

Pagina afdrukken

Figure 1

8. Fasten the Receptor in Place

NOTE: If the unit is shimmed, make sure the length of the fasteners is sufficient to span the shims and penetrate

into the studs at least 1" (2.5cm).

- Tack the corners of the receptor into place using #6 large- head galvanized nails (not supplied) to fasten the unit.

(Figure 1)

- Carefully remove the walls.

- Shim the receptor as needed at each of the remaining wall studs and finish nailing the receptor into place in the

predrilled holes. (Figure 2)

9. Caulk the Receptor

- Apply a bead of caulk around the receptor where the shower walls come in contact with the receptor.

Kohler Co.

Apply caulk/sealant here

Figure 2

1024937-2-