Kohler K-1018 Kurulum Kılavuzu - Sayfa 9

Banyo Armatürleri Kohler K-1018 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler K-1018 40 sayfaları. Shower modules and receptors
Ayrıca Kohler K-1018 için: Ev Sahibi El Kitabı (8 sayfalar)

Sayfayı Yazdır

Figure 1

8. Fasten the Receptor in Place

NOTE: If the unit is shimmed, make sure the length of the fasteners is sufficient to span the shims and penetrate

into the studs at least 1" (2.5cm).

- Tack the corners of the receptor into place using #6 large- head galvanized nails (not supplied) to fasten the unit.

(Figure 1)

- Carefully remove the walls.

- Shim the receptor as needed at each of the remaining wall studs and finish nailing the receptor into place in the

predrilled holes. (Figure 2)

9. Caulk the Receptor

- Apply a bead of caulk around the receptor where the shower walls come in contact with the receptor.

Kohler Co.

Apply caulk/sealant here

Figure 2

1024937-2-