Kohler TOOBI II Series Handleiding voor installatie-instructies - Pagina 3
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Kohler TOOBI II Series. Kohler TOOBI II Series 6 pagina's. Vanity tops & cabinets
Pagina afdrukken
CO C ONSTRUCTION REQUIREMENTS
Toobi II cabinets must be fixed to two nogs in the wall, the nog size should be 50 x 75mm.
TOOLS & MATERIALS REQUIRED - (Not Supplied)
TOOLS
To suit pipework
INSTALLATION
1
Drawer removal
(a) Open the drawer until at least 50% of the
drawer extends past the cabinet carcass.
50%
50
To suit screws
-3-
50mm from top of cabinet to centre of nog.
750 - 800
A height of 750 to 800mm from the floor
to the top of the cabinet is recommended.
MATERIALS - Not supplied & must be purchased separately
10g x 75mm
Screws (Refer step 3)
(b) Pull & lift up the drawer until it detaches
from the rails.
20mm
Fixing washers